Hughes Electric Spin Scrubber-This scrubber arrives in a compact box which includes numerous attachments for the scrubber (see photo). This box makes for a convenient location to store all of the scrubber components.-After opening the box, I found the various pieces of the scrubber (see photo). There is the scrubber body, telescoping rod, wall mount, charge cable and numerous brush attachments for different applications.-The brush attachments include the following:-sharp brush for corners and seams-small flat brush head for cleaning small areas such as the kitchen sink-big flat brush head for bathroom or kitchen-towel cloth for floors, glass, car surface-fiber brush for kitchen stove, range hood-imitation wool brush for polishing or waxing-sponge brush for glass or car-I first assembled the telescoping rod which can be extended to 55 inches when using it on floors or shortened for closer work such as shower walls.-The rod screws into the scrubber body.-The last step was to choose the attachment for whichever job I was going to accomplish.My use of the scrubber was concentrated in three different areas: kitchen sink, walk-in shower, bathroom sink and exterior windows/doors.For the kitchen sink, I removed the rod and used the small flat brush head to clean the sink. This job was accomplished in a short amount of time.The walk-in shower has a glass enclosure and a tiled floor. I chose the sponge brush for the glass walls. It was very effective at removing soap scum which had accumulated over a long period of use. This brush did not create any scratches on the glass walls. I then chose the big flat brush to clean the tiled floor. I applied a soft scratch cleanser and spread it using the scrubber. The sharp brush was helpful in cleaning the corners of the shower.The small flat brush head did a quick job on my bathroom sink removing all built-up stains.I attached the rod to the scrubber to clean exterior windows/doors. After wetting the surfaces, I applied a soap solution with a large brush. Then I used the sponge brush with the soap solution to remove the fine particles. I chose to preclean the surfaces to avoid scratching the surface with the scrubber. It was quick work to clean each surface.Here are my findings after use of the scrubber:-Attaching the various brushes was quick and easy. Removing the brushes worked well after following the instructions to gently shake the scrubber and pulling the brush head assembly vertically from the scrubber. Shaking the scrubber is required as the assembly won’t come off without it.-The two speeds of the scrubber were sufficient for all applications. I used the slow speed most of the time. The scrubber did not run out of power when I used it, though the work was accomplished quickly in my applications.-When using the scrubber with the rod for close work on vertical surfaces, it works best to turn the scrubber head to the left or right and work the scrubber back and forth horizontally rather than vertically.-The power button has three settings: high, low and off. The button must be held for a couple of seconds to start the scrubber. A second push will turn the scrubber off. The button must also be held for a couple of seconds to turn off the power.In summary, this scrubber with its various brushes makes quick work for cleaning surfaces around the house. It is easy to recommend this product as the value of this product far outweighs the cost.